Open BIM based Technological Environment for Building Design Quality Enhancement
1-2. 설계품질검증 자동화를 위한 각종 법규 및 제기준의 체계화된 논리규칙 데이터베이스 구축
- 건축물 설계품질 혁신을 위한 개방형 BIM 기술 환경 구축 | 국토교통부
//건축물의 구조기준 등에 관한 규칙 32조 (내력벽의 두께) 2항
Check(RSSB_32_2){
getResult(RSSB_32_7) = TRUE AND getResult(RSSB_32_3) = TRUE AND getResult(RSSB_28_1) = TRUE AND getResult(RSSB_3_3) = TRUE AND IF CS THEN KS
}
CS {
getResult(RSSB_33_3)=True
}
KS{
//HW means Height of wall
Wall myWall{
isObjectProperty(Wall.isLoadBearingWall) = TRUE
}
HW=getObjectHeight(myWall)
IF isObjectProperty(Wall.Structure.isMansoryStructure)=TRUE
IF getBuildingHeight()<5 m
IF getFloorNumber(myWall)=1
IF getObjectLength(myWall)<8 m
THEN getObjectThickness(myWall)>= 150 mm
ELSE THEN getObjectThickness(myWall)>= 190 mm
END IF
END IF
ELSE IF getBuildingHeight()>=5 m
getBuildingHeight()<11 m
getFloorNumber(myWall)=1
OR getFloorNumber(myWall)=2
THEN getObjectThickness(myWall)>= 190 mm
ELSE IF getBuildingHeight()>=11 m
IF getObjectLength(myWall)<8 m
getFloorNumber(myWall)=1
OR getFloorNumber(myWall)=2
THEN getObjectThickness(myWall)>=190 mm
ELSE IF getFloorNumber(myWall)=1
THEN getObjectThickness(myWall)>=290 mm
ELSE IF getFloorNumber(myWall)=2
THEN getObjectThickness(myWall)>=190 mm
END IF
END IF
IF getObjectMaterial(myWall)="벽돌"
THEN getObjectThickness(myWall)>= HW/20
ELSE IF getObjectMaterial(myWall)="Block"
THEN getObjectThickness(myWall)>= HW/16
END IF
END IF
}
PAGE MENU
법규 문장 내.외 관계논리 체계화 - 법규조항간 문장 관계
