//스프링클러설비의 화재안전기준(NFSC 103) 10조 (헤드) 7항5호
Check(NFSC103_10_7_5){
    IF CS THEN KS    
}

CS{
  getObjectProperty(Ceiling.gradient)>1/10  
}


KS{
  isParallel(BranchPipe, Ceiling.Top)=TRUE
  
  getResult(NFSC103_10_7_5_1)=TRUE
  OR getResult(NFSC103_10_7_5_2)=TRUE
} 

Python Code 변환 예정

자동화재탐지설비의 화재안전기준(nfsc 203) 7조 (감지기) 3항 6호

Check(NFSC203_7_3_6){

	KS

}

KS{

	Sensor mySensor{

	getObjectProperty(Sensor.sensingRange) = "SpotType"

	}

	getObjectGradient(FloorSlab, mySensor) < 45

} 

Python Code 변환 예정

자동화재탐지설비의 화재안전기준(nfsc 203) 7조 (감지기) 3항 7호 마목
Check(NFSC203_7_3_7_마){
	KS
}
KS{
	isInstalled(DetectingElement, Wall) = TRUE
	getObjectGradient(Wall, DetectingElement) < 5
} 

Python Code 변환 예정

//건축물의 피난ㆍ방화구조 등의 기준에 관한 규칙 15조 (계단의 설치기준) 5항 1호 
Check(REFB_15_5_1){     
KS
}

KS{
getObjectGradient(Ramp) <= 12.5%
} 

std_floor_area = 200
std_floor_area_label = '기준 연면적'
max_v = 1/8
max_v_label = '최대 경사도'

def Check():
    for building in SELECT('building'):

        for ramp in building.SELECT('ramp'):
            if ramp.SELECT('prop', '계단대체경사로').BOOL() == False:
                continue

            for change in ramp.SELECT('level change'):
                gradient = change.SELECT('gradient')
                g = gradient.NUMBER()

                if g > max_v:
                    gradient.ERROR('경사도: ' + str(g) + ' > ' + str(max_v))
                else:
                    gradient.SUCCESS('경사도: ' + str(g) + ' <= ' + str(max_v)) 

//연결살수설비의 화재안전기준(nfsc 503) 6조 (연결살수설비의 헤드) 3항 6호

Check(NFSC503_6_3_6){

	IF CS THEN (KS1 AND KS2)

}



CS{

	getObjectProperty(Ceiling.gradient) > 0.1

}



KS1{
isObjectProperty(Pipe.isBranchLines) = TRUE
	isParallel(Pipe, Ceiling.Top.) = TRUE

}



KS2{

	getResult(NFSC503_6_3_6_1) = TRUE

	getResult(NFSC503_6_3_6_2) = TRUE

} 

Python Code 변환 예정

//장애인ㆍ노인ㆍ임산부 등의 편의증진보장에 관한 법률 시행규칙 별표1 편의시설의 구조·재질등에 관한 세부기준(제2조제1항관련)

Check(ERCDAPA_2_1_*_1_4_나_1){
	IF (CS1 THEN KS1) OR (CS2 THEN KS2)

	ParkingUnit myParkingUnit{
		isObjectProperty(ParkingUnit.isParallelParking) = TRUE
	}

	CS1{
		isObjectProperty(ParkingUnit.isParallelParking) = TRUE
	}

	KS1{
		getObjectWidth(ParkingLotArea.isHandicapParking, a) >= 3.3 m
		getElementLength(ParkingLotArea.isHandicapParking) >= 5 m
	}

	CS2{
		isObjectProperty(ParkingLotArea.isParallelParking) = FALSE
	}

	KS2{
		getObjectWidth(ParkingLotArea.isHandicapParking, a) >= 2 m
		getElementLength(ParkingLotArea.isHandicapParking) >= 6 m
	}
}


check(ERCDAPA_2_1_*_1_4_나_2){
	getObjectGradient(ParkingSpace.Floor) <= 1/50
}


check(ERCDAPA_2_1_*_1_6_가_1){
	
	Door myDoor1{
		isObjectProperty(Door.isEntrance) = TRUE
	}

	Door myDoor2{
		isObjectProperty(Door.isEntrance) = TRUE
		getObject(Door.isEntrance) != getObject(myDoor1)
	}

	getObjectWidth(Door.isEntrance) >= 0.8 m
	isEgressDirection(myDoor1) = isEgressDirection(myDoor2)
	getObjectDistance(myDoor1, myDoor2) >= 1.2 m
}


check(ERCDAPA_2_1_*_1_6_가_2){
	
	isObjectProperty(Door.isAutomatic) = FALSE
	isObjectProperty(Door.isSillFree) = TRUE
}

check(ERCDAPA_2_1_*_1_8_가_2){
	
	getObjectVerticalDistance(FloorSurface,Door.Bottom)
}

check(ERCDAPA_2_1_*_1_8_나){
	
	Stair myStair{
		isObjectProperty(Stair.isEscape) = TRUE
		isObjectProperty(Stair.isOutdoor) = TRUE
	}

	getObjectWidth(myStair) >= 0.9 m 
	getObjectWidth(myStair.StairLanding) >= 0.9 m

	Stair myStair2{
		isObjectProperty(Stair.isEscape) = FALSE
		isObjectProperty(Stair.isOutdoor) = FALSE
	}

	getObjectWidth(myStair2) >= 1.2 m 
	getObjectWidth(myStair2.StairLanding) >= 1.2 m
}


check(ERCDAPA_2_1_*_1_8_다_1){
	
	hasObject(Stair, VerticalSurfaceStair) = TRUE
}

check(ERCDAPA_2_1_*_1_8_다_2){
	
	getObjectWidth(Stair.threadWidth) >= 0.28 m
	getObjectHeight(Stair.riserHeight) <= 0.18m
}

check(ERCDAPA_2_1_*_1_8_다_3){
	
	getObjectGradient(Stair.riserGradient) >= 60
	getObjectLength(Stair.nosingLength) < 3 cm
} 

Python Code 변환 예정

//주차장법 시행규칙 6조 (노외주차장의 구조·설비기준) 1항 5호 라목
Check(ERPA_6_1_5_라){
       IF (CS1 THEN KS1) OR (CS2 THEN KS2)
}

CS1{
	getObjectProperty(ParkingLot.Driveway.shapeType) = "LinearType"
}
KS1{
	getObjectProperty(ParkingLot.Driveway.gradient) < 17%
}
CS2{
	getObjectProperty(ParkingLot.Driveway.shapeType) = "CurvedType"
}
KS2{
	getObjectProperty(ParkingLot.Driveway.gradient) < 14%
} 

Python Code 변환 예정